Showing posts with label Wooden Surfboards. Show all posts
Showing posts with label Wooden Surfboards. Show all posts

Tuesday, September 18, 2012

Stretch your clamps further

Everyone has a limited amount of dollars to spend on gear so sometimes we need to get a little smarter to make what we have stretch further.

Here is a little trick I use when clamping the top and bottom decks on my plywood boards. This came in really handy while I was in the process of building up my clamp supply. It really helps with the way I build boards and is particularly helpful if your top or bottom decks are thick and need the wood to bend a little further right at the edge.

The idea behind this is that the spacer you are applying pressure to will spread the pressure from the clamp along the length of the joint. The spacer evens out the pressure between the clamps and this creates a longer point of contact rather than just two very small points at the clamp location.

-Get a length of timber say a minimum of twice as deep as it is wide that will run the length of your board while bent around the rail edge.


-Tack clamp the piece you will bend around your rail at half way making sure there is enough length at each end. 

-Clamp at even intervals working from the middle out to either end at the same time.

This piece acts like a beam, the deeper the spacer is the more resistance it has to bending and the smoother your joints will be. You will need less clamping pressure as well. 

Now you must figure out how far you can push the timber you are using as the spacer to get the best pressure.

By using this technique you can push the spacings between your clamps out a little further.






I hope this helps.

Tuesday, September 11, 2012

A toddlers wobble board


This is a little project I trialled for my eldest son when he was just over a year old. It's a toddlers wobble board, a board he can pretend to surf on that has both rocker and belly.  By playing on this board the kids get to learn how to balance on a board that wants to move in every direction just like a surfboard without too much extreme. Both my boy's love it and the eldest will hang ten while leaning back into a soul arch! 

To make this I used some 4mm pine ply that I had lying around the workshop. The construction is a centre stringer with one thickness of 12mm packing ply rails sandwiched between the top and bottom. The way to get the belly in the bottom is to have the bottom of the rocker well below the rail line. The board is finished with a couple of coats of linseed oil.

If you try this one watch how deep you try to push the belly. If you push the belly too deep the ply will end up pulling from the other direction and you will end up with reduced belly.... and a nicely domed top.  

I will add a quick sketch later to show the internal construction.

Have any of you made something like this? 


Wednesday, August 22, 2012

The board that started it all



Here is the board that started it all for me, a 5'8" Hollow fish made from Kawaka (native NZ cedar) and Western Red cedar that a friend generously gave me. I had no idea about surfboard design but had some confidence in my woodworking and problem solving skills.  I bought Jack Young's Building hollow wooden surfboards e-book and just started.
Working out how to build a board with limited space and tools was a completely stimulating process. Working my way through this build triggered a desire to make wooden board building easier and opened my eyes to the infinite world of surfboard design and craftsmanship. 

Post a comment below with a picture of your first board. 

Monday, August 13, 2012

Share your knowledge

If you build Wooden surfboards or its on your list of things to do please look around this site. Here you will find all sorts of hints and tips for building nearly every component of a wooden surfboard. This site is a melting pot of different tips and techniques builders are using to build wooden surfboards. We each make our boards in different ways and with different philosophies, enjoying the process and riding the results. Collectively we can share what we know of both technique and skills to help another builder solve some construction issues, increase knowledge and progress our craft. 

Please contribute by getting in touch with me and sharing hints, tips and detailed how to articles so they can be curated and posted for everyone to learn from.